DX6-TF Digital Beltpack Transmitter
Replacement or add-on beltpack transmitter for the Fitness Audio DX6 digital wireless system. Pairs automatically with any DX6-R or DX6-PR receiver, runs on rechargeable batteries with the Fitness Audio Charging Dock, and fits standard instructor pouchbelts. Because the DX6-R receiver has two channels built in, adding this second transmitter makes your existing system team-teach ready.
Transmitter only. Headset microphone and receiver sold separately. Not compatible with D-Series or UHF receivers.
Weight: 2.1 oz
SKU DX6-TF
Spec sheets and manuals
DX6-TF · Digital beltpack transmitter
Add a second instructor to a DX6 system.
The DX6-R receiver has two channels built in. This transmitter fills the second one, so one receiver runs two miked instructors. 2.4GHz digital, rechargeable in the HC-24 dock, 2.1 oz.
Pairing
Hold SYNC, hold SYNC, teach.
No frequency charts and no menus. ASAP (Auto Search Auto Pair) finds a clean 2.4GHz channel for you.
The signal is checked three times before it reaches your sound system, which is what keeps it steady in a room full of phones and Wi-Fi.
Three steps
Pair a new transmitter
- 1Hold SYNC on the receiverDX6-R
- 2Hold SYNC on the transmitterDX6-TF
- 3The channel locks. Teach.Done
Takes a few seconds. Repeat for the second channel.
For the instructor
Plug in an Aeromic, Cyclemic or EMic with the 4-pin T4 connector. Push it straight in, press the button to release it.
Drop the pack in the dock after class. Clean the pins and apply eGloop monthly so sweat never gets a foothold.
For the installer
One DX6-R, two DX6-TFs, two headsets: a team-teaching room in one rack slot with one power supply.
Transmitter only. Receiver, headset and batteries sold separately. 1-year warranty.
Building a DX6 system from scratch? Start with the receiver.
About the DX6-TF
Tech specs
Pairing Is Automatic
The DX6-TF connects to your receiver through the system's ASAP (Auto Search Auto Pair) function. Power on and the receiver finds a clean channel and links the transmitter on its own. There are no frequencies to match, which means a replacement or spare goes into service in seconds rather than requiring setup by whoever knows the equipment best.
Smaller Pack, Dock Charging
This transmitter is smaller than previous Fitness Audio beltpacks and sits comfortably in a standard pouchbelt, including the Aeromic Pouchbelt range. Fit it with rechargeable batteries and it drops straight into the Fitness Audio Charging Dock between classes. Studios running full daily schedules tell us dock charging is the difference between batteries being a daily chore and something nobody thinks about — it also saves wear on the battery door, which is a common failure point on any beltpack used every day.
2.4GHz digital, frequency-hopping, three-stage data redundancy
ASAP auto pair with DX6-R and DX6-PR receivers only
Rechargeable AA batteries, HC-24 dock compatible. Batteries not included
4-pin T4 (Aeromic, Cyclemic, EMic)
2.1 oz
1 year
Compatibility, Stated Plainly
The DX6-TF pairs with DX6 receivers only: the DX6-R studio receiver and the DX6-PR portable receiver. It is not backwards compatible with the older Fitness Audio D-Series, and it will not work with UHF systems like the U-Series, or with receivers from other brands. Your headset microphone connects to the transmitter in the DX6-compatible termination — if you are unsure which termination your mic has, contact us before ordering.
FAQ
Will the DX6-TF work with my existing receiver?
Only if your receiver is from the DX6 range: the DX6-R studio receiver or the DX6-PR portable receiver. It will not pair with the older Fitness Audio D-Series, with UHF receivers such as the U-Series, or with other brands' systems.
Can I add a second transmitter to my DX6 system for team teaching?
Yes, and no other hardware is needed. The DX6-R receiver has two receiver channels built in, so a second DX6-TF gives you two live mics through your existing receiver.
How do I pair a new DX6 transmitter with the receiver?
Pairing happens automatically. The receiver's ASAP (Auto Search Auto Pair) function finds a clean channel and links the transmitter when the system powers on. A replacement transmitter is ready to teach with in seconds.
What batteries does the DX6-TF use, and can they be rechargeable?
It runs on rechargeable batteries and is designed to work with the Fitness Audio Charging Dock, so the whole pack docks between classes instead of opening the battery door every day.
Does it come with a headset microphone?
No. This listing is the transmitter only. Aeromic, Cyclemic, and E-Mic headsets in the DX6-compatible termination are sold separately, along with the receivers.
How do I protect the transmitter from sweat?
Wear it in a neoprene pouchbelt, which puts a moisture barrier between the pack and your body. Most instructors pair this transmitter with an Aeromic Pouchbelt in the standard, Hipster, or armband style.