The Gov'nor

Sale price$399.00

In stock

SKU SPL2.2

The volume policy that enforces itself.

Every facility has a volume policy. Almost none of them have a way to enforce it. The sign gets ignored, the staff meeting wears off in a week, and the level creeps up one notch per class until the neighbors, the landlord, or the front desk have had enough.

The Gov'nor is the enforcement. It's a single rack space limiter that sits between your mixer and your power amp with a hard ceiling set at the level you choose. Below the line, instructors mix however they like. The line itself is not negotiable, because it's not a rule. It's wiring.

When paired with The Trigger, the system becomes fully automated — activating limiting instantly when room SPL thresholds are breached.

Shipping box: 20.5 x 8.3 x 3.9 in, 4.4 lb

The Gov'nor · SPL2.2 limiter

The volume policy that enforces itself.

A single rack space between your mixer and your power amp, with a hard ceiling set at the level you choose. Below the line, instructors mix however they like. The line itself is not negotiable.

The Gov'nor 1U sound pressure limiter, front panel with LED level bar and power switch, on an orange background
01One rack space, one job A hard ceiling on the level reaching your amp. Below it, nothing changes.
Close-up of The Gov'nor front panel with the SPL remote, Normal and Limit indicator lights beside the yellow and orange LED level meter
02Normal or Limit, at a glance A two-channel LED bar and Normal/Limit indicators show what the limiter is doing.
Fitness Audio Gov'nor SPL2 sound pressure limiter, front panel with LED level meter above and rear panel with RCA inputs and outputs below
03Between the mixer and the amp Mixer outputs in, amp inputs out. Any brand on either side.
The Trigger LM30 loudness monitor mounted on the wall of an indoor cycling studio beside the instructor podium
04Pairs with The Trigger Link it and the room's measured level fires the limiting. Unplug either unit and the amp goes quiet.

How it enforces

It's not a rule. It's wiring.

Set the ceiling once, against a handheld SPL meter or from The Trigger's reading of the room, and the Gov'nor holds it from then on. Below the line the signal passes through untouched and instructors mix normally. Cross it and the limiter engages, whatever the mixer is set to.

The four adjustment controls are on the rear under a security cover that closes with wire seals, so any change leaves evidence. Linked with The Trigger, pulling the plug on either unit cuts the signal to the amp instead of removing the limit.

For the owner or manager

You decide the level: house policy, lease conditions, local noise rules. Set it with a handheld SPL meter and it's enforced every class, whoever is teaching. No staff meeting required.

The front panel has one control, the power switch. Nothing an instructor can nudge.

For the installer

Standard 1RU unit, line level in and out between any mixer and any amp. Pair it with The Trigger for level-triggered limiting, or run it in manual mode. Shipping box 20.5 x 8.3 x 3.9 in, 4.4 lb.

Installers and dealers can apply for trade pricing.

1RURack space
4Sealed rear controls
0Ways around it when linked
AnyMixer and amp brand

Add The Trigger and the room's actual level sets off the limiting, with the reading on the wall for everyone to see.

Key Features

Engineered for performance and built to last

Set it with a meter. Or let The Trigger run it.

Two ways to run the room. In manual mode, you set the ceiling against a handheld SPL meter, for example capping a class at an average level your policy allows, and the Gov'nor holds it from then on. Link it to The Trigger loudness monitor instead and the system watches the actual room: when the sound exceeds your set level, the Trigger activates the Gov'nor's limiting circuit and pulls the volume back to the line, then releases when the level comes back down. No manager required. It works at 6 AM and 9 PM identically.

Sealed against opinions

Volume limiters have a natural enemy: whoever disagrees with them. The Gov'nor's four adjustment controls sit on the rear panel under a security cover that closes with wire seals, so any change leaves evidence. Up front there's a two-channel green-to-yellow-to-red LED display showing the signal passing through, and exactly one control anyone can touch: the power switch.

Fails silent, not loud.

The classic way around a limiter is to pull it out of the chain. Linked with The Trigger, the Gov'nor is designed so that doesn't work: switch off or unplug either unit and the amplifier receives no signal at all. Bypassing the system doesn't get you loud. It gets you silence, which gets reported immediately. The only way to have sound is to have limited sound.

Works with the gear you already own.

The Gov'nor is brand-agnostic: a standard 1RU unit that connects between any mixer's outputs and any power amp's inputs. It completes the Fitness Audio control chain with your Aeromix mixer and The Trigger, but it will hold the line in front of anyone's amplifier.

Model

Gov'nor SPL2.2

Function

Sound pressure level limiter with settable ceiling

Placement

Between mixer outputs and power amp inputs

Size

1 rack unit (1RU)

Setup modes

Manual (referenced to a handheld SPL meter) or linked to The Trigger for automatic level-triggered limiting

Display

Two-channel green/yellow/red LED bar showing signal level

Video

FAQ

Monday–Friday, 10AM–4:30PM PacificAverage answer time: 24h